ACRONIS Disk Director 11 Home Betriebsanweisung PDF herunterladen (Seite 53)

 The software runs the appropriate script and proceeds to the next window.

When adding the plug-in to the existing PE ISO:

 Select Use WinPE files located in the folder I specify

 Specify the path to the folder where the WinPE files are located.

4. [optional] Specify Windows drivers to be added to Windows PE. Once you boot a machine into

Windows PE, the drivers can help you access the device where the backup archive is located.

Click Add and specify the path to the necessary *.inf file for a corresponding SCSI, RAID, SATA

controller, network adapter, tape drive or other device. You will have to repeat this procedure

for each driver you want to be included in the resulting WinPE boot media.

5. Choose whether you want to create ISO or WIM image.

6. Specify the full path to the resulting image file including the file name.

7. Check your settings in the summary screen and click Proceed.

8. Burn the .ISO to CD or DVD using a third-party tool or copy to a flash drive.

Once the machine boots into WinPE, Acronis Disk Director starts automatically.

To create a PE image (ISO file) from the resulting WIM file:

 replace the default boot.wim file in your Windows PE folder with the newly created WIM file. For

the above example, type:

copy c:\AcronisMedia.wim c:\winpe_x86\ISO\sources\boot.wim

 use the Oscdimg tool. For the above example, type:

oscdimg -n –bc:\winpe_x86\etfsboot.com c:\winpe_x86\ISO

c:\winpe_x86\winpe_x86.iso

For more information on customizing Windows PE, see the Windows Preinstallation Environment

User’s Guide (Winpe.chm).

7.1.2 Working under bootable media

Operations on a machine booted with bootable media are almost the same as operations in the

running operating system. The difference is as follows:

1. The Check volume (p. 38) and Defragment volume (p. 39) operations are not available under

bootable media.

2. Specify the disk layout (p. 21), if two or more Windows operating systems installed on the

machine. If only one Windows operating system is installed, the disk layout of this operating

system will be used. For bare metal, or if no Windows operating system is found, the disk layout

will be used according to the bootable media environment (Linux-based or Windows PE).

3. The Linux-based bootable media shows local disks and volumes as unmounted (sda1, sda2...).

4. The log lifetime is limited to the current session. You can save the entire log or the filtered log

entries to a file.

7.1.2.1 Setting up a display mode

For a machine booted from media, a display video mode is detected automatically based on the

hardware configuration (monitor and graphics card specifications). If, for some reason, the video

mode is detected incorrectly, do the following:

1. In the boot menu, press F11.

2. Add the following command to the command prompt: vga=ask, and then proceed with booting.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 86 87

Keine Kommentare

ACRONIS Disk Director 11 Home Betriebsanweisung Seite 53